Read below to see how Nansulate® coatings can help you reduce heat transfer in a variety of areas around your facility to help you save energy & money.
Outdoor InsulationEffectively insulate fuel storage tanks, hot water tanks, and more.
Insulating outdoor surfaces like tanks, duct work, and pipes can be an ongoing struggle. Many companies that we've visited simply don't insulate them because fiberglass or rock wool can't stand up to the rain and weather.
You can easily insulate outdoor equipment and save energy by using Nansulate® coatings. Simply spray-on the coating in layers on the exterior and this liquid insulation will not only stand up to weathering, but will also prevent corrosion, and insulate consistently over time.
Nansulate® Translucent PT coating for surfaces up to 256F (125C). Typical application is 6-8 coats, depending upon temperature needs.
Covers 450 S.F. (42 m2) per gallon at 1-coat or 56.25 S.F. (5.25 m2) per gallon at 8-coats.
PRODUCT PAGE
Nansulate® High Heat coating for surfaces up to 400F (204C). Typical application is 10-12 coats, depending upon temperature needs.
Covers 450 S.F. (42 m2) per gallon at 1-coat or 37.5 S.F (3.5 m2). per gallon at 12-coats.
PRODUCT PAGE
Skylights/Windows
Stop heat loss and gain through windows and skylights & keep the light.
The Tampa Port Authority, City of Miami, and Frost Art Museum are just a few organizations that have benefited from coating their skylights with Nansulate® coating technology.
Windows are frosted for security, while still allowing in the light. Heat and UV penetration are greatly reduced with just a few coats of this award-winning technology.
Nansulate® Energy Protect coating for skylights, windows, walls, and ceilings. Use 3-coats applied at 4 mils per coat.
Covers 450 S.F. (42 m2) per gallon at 1-coat or 150 S.F. (14 m2) per gallon at 3-coats.
PRODUCT PAGE
Large Equipment
Insulate any size or shape equipment with a liquid spray-on insulator.
Two industries where Nansulate® technology has made a huge impact is Textile and Food Manufacturing. Both have large equipment that could not be insulated in the past for various reasons.
Dying machines of all shapes and sizes are used in the textile industry, and before they discovered Nansulate® coatings, there was nothing they could use to insulate this heat intensive equipment. Our textile clients are saving an average of 20% on energy costs.
Food manufacturers have many sensitive areas where fibrous insulation can't be used due to potential contamination of their product. They now can insulate ovens, bottle washers, and more with our GP coating which is NSF registered for incidental food contact surfaces. Energy waste gone.
Nansulate® EPX 2-part chemical resistant insulation.
Covers 76 S.F. (7.06 m2) per gallon at 1-coat or 38 S.F. (3.53 m2) per gallon at 2-coats.
PRODUCT PAGE
Nansulate® GP-NSF coating for surfaces up to 256F (125C).
Covers 450 S.F. (42 m2) per gallon at 1-coat or 56.25 S.F (5.25 m2). per gallon at 12-coats.
PRODUCT PAGE
Stop heat loss and gain through windows and skylights & keep the light.
The Tampa Port Authority, City of Miami, and Frost Art Museum are just a few organizations that have benefited from coating their skylights with Nansulate® coating technology.
Windows are frosted for security, while still allowing in the light. Heat and UV penetration are greatly reduced with just a few coats of this award-winning technology.
Nansulate® Energy Protect coating for skylights, windows, walls, and ceilings. Use 3-coats applied at 4 mils per coat.
Covers 450 S.F. (42 m2) per gallon at 1-coat or 150 S.F. (14 m2) per gallon at 3-coats.
PRODUCT PAGE
Large EquipmentInsulate any size or shape equipment with a liquid spray-on insulator.
Two industries where Nansulate® technology has made a huge impact is Textile and Food Manufacturing. Both have large equipment that could not be insulated in the past for various reasons.
Dying machines of all shapes and sizes are used in the textile industry, and before they discovered Nansulate® coatings, there was nothing they could use to insulate this heat intensive equipment. Our textile clients are saving an average of 20% on energy costs.
Food manufacturers have many sensitive areas where fibrous insulation can't be used due to potential contamination of their product. They now can insulate ovens, bottle washers, and more with our GP coating which is NSF registered for incidental food contact surfaces. Energy waste gone.
Nansulate® EPX 2-part chemical resistant insulation.
Covers 76 S.F. (7.06 m2) per gallon at 1-coat or 38 S.F. (3.53 m2) per gallon at 2-coats.
PRODUCT PAGE
Nansulate® GP-NSF coating for surfaces up to 256F (125C).
Covers 450 S.F. (42 m2) per gallon at 1-coat or 56.25 S.F (5.25 m2). per gallon at 12-coats.
PRODUCT PAGE
----------
SAVE 10% OFF ANY PRODUCT PURCHASE WITH CODE:
BLOG2013
Not applicable with any other discounts.
Order online easily through our secure shopping cart.
QUESTIONS?
Contact us at 800-767-3998 or contact@nansulate.com
